Haxorware 調變解調器韌體/安裝
安裝方式取決於您可用的方法。某些方法需要不同的硬體修改，例如 Jtag 或序列聯結器（不在此維基的範圍內）始終備份當前韌體。如果您在現有韌體上刷入 2MB 映象，您將永遠失去調變解調器的原始證書。
如果您的調變解調器當前執行的是無限韌體，建議將其恢復到出廠狀態，就像剛開箱一樣。為此，您需要恢復您在刷入無限韌體之前所做的 2MB 備份（我希望您已經做過備份）。命令如下：
detect ldram 9fc00000 (A File Open dialog will appear, find your 2MB backup file and click open) program 9fc00000 200000
建議您在將 haxorware（或任何其他破解韌體）刷入您的調變解調器之前進行備份。要使用 JtagUtility 建立 2MB 備份，請輸入以下命令：
detect getram 9fc00000 200000 save 9fc00000 200000 (A save as dialog will appear, choose where to save your 2MB backup)
要使用 JtagUtility 將 haxorware 刷入您的調變解調器，請發出以下命令：
detect ldram 9fc10000 A File Open dialog will appear, find the haxorware firmware file you want (haxorware11revXX-XXXX.bin) and click open program 9fc10000 130000
刷機完成後，重啟您的調變解調器，享受 Haxorware 帶來的體驗
診斷電纜說明（需要帶噪聲的引導載入程式）
Set your computers ip to 192.168.100.10 Set up a TFTP server with haxorware11revXX-XXXX.bin in its root Connect to modem with hyperterminal or putty (with changed CR/LF to LF) While modem is turning on press p (you should get a prompt) If you do not get a prompt for pressing p, your modem does not have a noisy bootloader, and you will have to use JTAG Set the Modem IP to 192.168.100.1 Leave everything else at their defaults (just press enter) When you get at the bootloader menu press d Enter 192.168.100.10 as TFTP IP Enter haxorware11revXX-XXXX.bin as filename It should download (the dots indicate progress) When asked what image to save to, answer 1 Answer y to the "Store uncompressed image" prompt press b once you are back at the menu to boot the modem
如果您的調變解調器當前執行的是無限韌體，建議將其恢復到出廠狀態，就像剛開箱一樣。為此，您需要恢復您在刷入無限韌體之前所做的 2MB 備份（我希望您已經做過備份）。命令如下：
detect ldram 9fc00000 (A File Open dialog will appear, find your 2MB backup file and click open) program 9fc00000 200000
建議您在將 haxorware（或任何其他破解韌體）刷入您的調變解調器之前進行備份。要使用 usbjtag 建立 2MB 備份，請輸入以下命令：
detect getram 9fc00000 200000 save 9fc00000 200000 (A save as dialog will appear, choose where to save your 2MB backup)
要使用 USBJTAG 將 haxorware 刷入您的調變解調器，請用此檔案中的檔案覆蓋您的 usbjtag.def 檔案。之後，啟動 USBJTAG 並選擇 SB5101 配置檔案（工具->配置將開啟配置檔案選擇對話方塊）。然後發出以下命令：
detect ldram Firmware (A File Open dialog will appear, find haxorware11revXX-XXXX.bin and click open) program Firmware
刷機完成後，重啟您的調變解調器，享受 Haxorware 帶來的體驗
如果您的調變解調器當前執行的是無限韌體，建議將其恢復到出廠狀態，就像剛開箱一樣。為此，您需要恢復您在刷入無限韌體之前所做的 2MB 備份（我希望您已經做過備份）。命令如下：
detect ldram 9fc00000 (A File Open dialog will appear, find your 2MB backup file and click open)
建議您在將 haxorware（或任何其他破解韌體）刷入您的調變解調器之前進行備份。要使用 usbjtag 建立 2MB 備份，請輸入以下命令：
detect getram 9fc00000 200000 save 9fc00000 200000 (A save as dialog will appear, choose where to save your 2MB backup)
要使用 USBJTAGNT 將 haxorware 刷入您的調變解調器，請啟動 USBJTAGNT 並選擇 SB5101Mod 配置檔案（工具->配置將開啟配置檔案選擇對話方塊）。然後發出以下命令：
detect ldram Firmware (A File Open dialog will appear, find haxorware11revXX-XXXX.bin and click open) program Firmware
刷機完成後，重啟您的調變解調器，享受 Haxorware 帶來的體驗
USBJTAG NT 只是李少為了透過計劃報廢的方式從使用者那裡獲得更多錢而做出的努力（否則 USBJTAG NT 軟體也會支援常規的 USBJTAG）。
Set your computers ip to 192.168.100.10 Set up a TFTP server with haxorware11revXX-XXXX.bin in its root Make sure the haxorware webgui isn't currently open Connect to modem with hyperterminal or telnet to the IP 192.168.100.1 Enter your username and password cd /ip ipconfig 1 release y dload -i 1 -l -f 192.168.100.10 haxorware11revXX-XXXX.bin y cd / reset
Haxorware 1.1 現在應該可以啟動
Make sure the modem's cpu usage is low, so if it's currently scanning for downstream make it stop by going to the web shell and doing cd /docsis scan_stop The safest time to do the Firmware Upgrade is when the modem is fully operational and online. Then use the Firmware Upgrade page on the WebGUI, find haxorware11revXX-XXXX.bin and upload it to the modem in the Firmware section Reboot the modem using the WebGUI or otherwise, and the new version of Haxorware should now boot